SEAFLO HIGH FLOW WATER PRESSURE SYSTEM 20LPM/5.5GPM 12V

Description

This Seaflo 12V High Flow Water Pressure pump system is self-priming, and can run dry without damage, performance reliable and low current. With a built-in bypass function, this pump is able to reduce rapid cycling and not allow water to flow back from the outlet side to the inlet side of the pump. This automatic demand 12V water system pump has a built-in pressure switch, which automatically starts and stops the pump when the faucet is opened and closed. They are easy to install service and winterize.

PUMP
Type: 5 Chamber positive displacement diaphragm pump, self priming, capable of being run dry
Control Type: Pressure switch
Max Recommended Temperature: 60° C（140° F）
Priming Capabilities: 6 feet (1.8 m) suction lift
Re-start Pressure: Shut-on Pressure 20 PSI：20 PSI ±3 PSI / Shut-off Pressure 60 PSI：60 PSI ±3 PSI
Inlet/Outlet Ports: 1/2″ MNPT
Weight: 14.3 lbs (6.45 kg)

MOTOR
Leads: 14 AWG, 13″ (33 cm) long with 2-Pin connector/Leads
Duty Cycle: Interrnittet
Max.Amp Draw: 17.0 A
Fuse: 25.5 A (Not included)

CONFIGURATION
Tank Volume: 1.0L
Voltage: 12V
Control Type: Switch
Open Flow (GPM/LPM): 5.5 / 20.8
Pressure On (PSI/BAR): 20 / 1.4
Pressure Off (PSI/BAR): 60 / 4.2
Max Draw: 18.0A
Ports: 1/2″ MNPT
Wire Connections: 2-Pin/Leads

Base x 1
Screw for Accumulator Tank x 2
1L Accumulator Tank x 1
51F09 Fitting x 1
Screw for Pump x 4
NEW 51 Series Diaphragm Pump x 1
Sealed Copper Terminal x 1
Button Bushings x 2
Rubber Feet x 4
Flat Gasket x 12
Screw Nut x 6

Additional information