JABSCO PUMP UTILITY PUPPY 2000

Description

This pump can be used for general transfer pumping where self-priming, debris tolerance and portable DC operation is desired. It is deal for Bilge Pumping, Bait Tank, Wash Downs, and General Marine Service. Non marine uses for these pumps may include chemical processing, re-circulation of aqueous media including coolants and sump emptying.

The pump may be mounted in any position without loss of efficiency; however, it is suggested that the pump head be down if vertical mounting is desired. The rotation of the motor shaft determines the location of the pumps intake and discharge ports. No leaks or blockages should be in the system as inlet leaks will degrade self-priming capability.

Features:

– Built-in dry-running protection for up to 10 minutes after initial prime
– Self-priming up to 4 feet (1.2m) of vertical lift
– Lip type shaft seal
– Non-rusting bronze body
– Continuously rated electric motor
– Simple, fully serviceable design with few wearing parts
– Bronze pump head
– Bilge debris presents no problem to this bronze bodied, flexible impeller design
– Compact design delivers high flow rates
– Continuous duty motor
– Will not airlock; continues to operate even when air passes through the system

Voltage: 12V DC, CE-approved
Max Flow Rate: 30lpm / 8gpm
Max Head: 6m
Output: 156 W
Fuse: 15 A
Max Pressure: 8 PSI (0.55 bar) or 19′ (5.8m) of lift
Self-Priming: 3–4′ (0.9 – 1.2m) dry
Ports: 3/4″ (19mm) BSP
Motor: Permanent magnet DC 12V
Body: Bronze
Liquid Temperature Range: 7°C – 82°C
Shaft: Stainless steel
Seal: Lip seal, Nitrile
Impeller: Nitrile
Dimensions: 110mm x 179mm x 124mm
Weight: 4kg

Jabsco Pump Utility Puppy x 1

Additional information